FLUID FILM Liquid A, 1 liter

One component oily liquid, solvent-free, lanolin based soft coating.

• 1 liter bottle
• Viscosity: low (eg. like olive oil)
• Creep ability: + + + + +
• Protection: min. 2 years (in closed cavities)
• Processing: with conventional compressed air systems without heating the material or in the flood method

General usage:

• This non oxidizing rust retarding compound formulated as a liquid is
  used to form protective films in ballast tanks on ships, drilling platforms,
  dry docks, barges, rudder interiors, chain lockers, and any metal surface
  subjected to severe salt water corrosion and to corrosive marine
  atmospheres.
• FLUID FILM Liquid A is easily applied by spray or floatation methods. It
  forms with water or air humidity a gel which adheres to metal surfaces
  and is not subject to discharge overboard during deballasting.
• FLUID FILM Liquid A is also used as a penetrant and lubricant. It may
  be used to help descale tanks with heavy scale.

Principal characteristics:

• contains highly polar lanolin and water displacing additives, which
• deposit the product below water films on the metal surfaces. This is
  essential for proper penetration and adhesion of the protective coating
  being applied;
• does not contain solvents, non toxic during application;
• requires minimum surface preparation;
• penetrates existing rust, displaces water, forms with water and/or air
  humidity a gel;
• adheres to and gives full protection to wet or dry surfaces;
• does not dry out, harden or crack;
• resists water washing yet can easily be removed when required;
• can be applied by air and airless spraying, brush, roller and floatation.
  FLUID FILM Liquid A meets and surpasses the requirements of the
  United States Military Specification MIL-C-16173.

Airless spraying equipment: